All operators and mechanics should be trained.

STX Stump Grinder Model No. Serial No. and Up Model No. G-Serial No. and UpHeight: cm ( inches). SGR Stump Grinder Model No. Serial No. and Up. You may contact Toro directly at shrubcleanup.buzz for product and accessory information, help finding a dealer, or to register your product. Read the Operator's Manual and other training material. If the operator(s) or mechanic(s) cannot read English, it is the owner's Cutting Depth: 30 cm (12 inches). SGR Stump Grinder Model No.

Serial No. and Up Model No. G-Serial No. and Up Model No. HD-Serial No. and UpCutting Depth: 30 cm (12 inches). Read the Operator’s Manual.

Squeeze the ends of the hose clamp on the engine side of the valve together and slide it up the fuel line away from the valve Figure

Warning, cutting wheel- to adjust the cutting wheel teeth between jobs 1) Loosen the nut; 2) Push the tooth down and rotate it 1/3 turn; 3) Tighten the nut to 68 Nm (50 ft-lb); 4) Proceed with shrubcleanup.buzzg Depth: 30 cm (12 inches).

Start the engine, raise the grinder, set the throttle lever to the FAST position, and move the machine to the stump to be ground. Use the grinder control lever and the traction control to position the grinder to the side of the front of the stump, about 2 cm (1 inch) below the surface (Figure 20).Height: cm (51 inches).

FormNo. RevA STXStumpGrinder ModelNo SerialNoandUp ModelNoG- SerialNoandUp shrubcleanup.buzz. This project will call for a shovel or garden mattock, a chain saw, a drill, a wheelbarrow and a gas-powered stump grinder. stump grinding in Lake Mary, FL. stump grinding in Lake Mary, FL. The grinder will automatically set you back a couple of thousands of dollars. If you choose to rent, you need to shell outper day, depending on Missing: toro stump grinder.

Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro Dingo TX-style control system has two simple levers that are simple to learn, master and use.

Adjust the drive-belt tension by tightening tension bolt and jam nut against the engine mounting plate, pushing the engine rearward.

Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep feature automatically. Well balanced, easy-to-operate and simple to maintain, the SGR turns stumps into mulch without breaking a sweat. With the exclusive cutting wheel with easily replaceable grinder teeth, the SGR offers the smoothest cutting experience of any walk-behind grinder on the market.